Search Result of "Peter H. Meckl"

About 7 results
Img
Img

ที่มา:วิทยาสารเกษตรศาสตร์ สาขา วิทยาศาสตร์

หัวเรื่อง:ไม่มีชื่อไทย (ชื่ออังกฤษ : Integrating an Input Shaper with a Quantitative-Feedback-Theory-Based Controller to Effectively Reduce Residual Vibration in Slewing of a Two-Staged Pendulum with Uncertain

ผู้เขียน:Imgดร.วิทิต ฉัตรรัตนกุลชัย, รองศาสตราจารย์, Imgภูวดล โพธิ์แดง, ImgPeter Heinrich Meckl

สื่อสิ่งพิมพ์:pdf

Abstract

In this study, a control system was proposed consisting of an outside-of-the-loop input shaper and a feedback controller based on quantitative feedback theory. The input shaper convolves the reference input with a properly designed impulse sequence to generate a shaped reference input that reduces the excitation in the system’s modal frequencies, resulting in less residual vibration. Recently, the input shaper has been placed inside-of-the-loop to attenuate noise-induced vibration under hard nonlinearity. However, this setting cannot reduce the vibrations induced from plant-input and plant-output disturbances as well as from plant model uncertainty. A controller was designed to meet various disturbance rejection specifications, when plant uncertainty is also taken into account. The input shaper was then designed using the closed-loop natural frequencies and damping. Together, the proposed control system could effectively reduce residual vibrations especially those induced from disturbances and uncertainty. The control system was applied to a two-staged pendulum where all masses were lumped together to create a simplified model used in controller design, and the inertia forces of both links and payload were treated as plant-input disturbance. Simulation and experimental results indicated that the control system was very effective in residual vibration reduction in the presence of uncertainty and disturbances.

Article Info
Agriculture and Natural Resources -- formerly Kasetsart Journal (Natural Science), Volume 048, Issue 1, Jan 14 - Feb 14, Page 150 - 166 |  PDF |  Page 

Img

ที่มา:วิทยาสารเกษตรศาสตร์ สาขา วิทยาศาสตร์

หัวเรื่อง:ไม่มีชื่อไทย (ชื่ออังกฤษ : Reference Input Shaping to Reduce the Move Time of a Very Flexible One-Link Manipulator)

ผู้เขียน:Imgดร.วิทิต ฉัตรรัตนกุลชัย, รองศาสตราจารย์, Imgธนพล ศรีวงษา, ImgPeter H. Meckl

สื่อสิ่งพิมพ์:pdf

Abstract

When a robot manipulator is required to be light, long or to move quickly, its link tends to flex. When the link flexes, its end position is difficult to control. In fact, the flexibility brings about undesirable attributes such as non-minimum phase, tip vibration and complicated dynamics. As a result, in contrast to a rigid-link robot, control of the flexible-link robot is more challenging and is still an open research problem. This study aimed to design a two-degrees-of-freedom control system from a simple model. The controller ensured good tracking and proper disturbance rejection. The closed-loop natural frequency was then computed, with the reference input shaped such that its energy content was low around the natural frequency. The experiment showed that this proposed method reduced tip vibration significantly resulting in a faster move time.

Article Info
Agriculture and Natural Resources -- formerly Kasetsart Journal (Natural Science), Volume 043, Issue 2, Apr 09 - Jun 09, Page 411 - 421 |  PDF |  Page 

Img

ที่มา:วิทยาสารเกษตรศาสตร์ สาขา วิทยาศาสตร์

หัวเรื่อง:ไม่มีชื่อไทย (ชื่ออังกฤษ : Vibration Reduction in Slewing of a Very Flexible One-Link Manipulator Using Shaped Reference Inputs)

ผู้เขียน:Imgดร.วิทิต ฉัตรรัตนกุลชัย, รองศาสตราจารย์, Imgกนกศักดิ์ เอี่ยมสมัย, ImgJitnapa Soontrajarn, ImgPeter H. Meckl

สื่อสิ่งพิมพ์:pdf

Abstract

Future trends suggest that manipulators will be required to be light and to carry large payloads and this encourages the study of flexible-link robots. However, after more than three decades of investigation, vibration control of the flexible-link robot is still an unsolved problem. Researchers have made much progress using active and passive controls and with structural modification and new sensors and actuators, but a simple, effective and reliable vibration controller has yet to be found. To reduce vibration, shaping the reference input so that no energy is injected around the flexible modes can be performed in the time domain, by convolution of the input with a sequence of impulses or in the frequency domain, by optimally constructing a new input from suitable basis functions. While many researchers have applied the time-domain method to the flexible-link robot, the frequency-domain method is rarely seen with this type of robot. This paper investigated the results of applying the frequencydomain command shaping method to a flexible one-link robot. The closed-loop system consisted of a feed-forward, computed-torque loop and a feedback PID loop. As vital information for this method, the range of natural frequencies with respect to the robot’s parameters was obtained from an exact model, treating the flexible link as an Euler-Bernoulli’s beam. Using minimum a priori knowledge of the robot, the experimental results showed that the method is effective in reducing the vibration of a slewing flexible-link robot.

Article Info
Agriculture and Natural Resources -- formerly Kasetsart Journal (Natural Science), Volume 045, Issue 6, Nov 11 - Dec 11, Page 1158 - 1170 |  PDF |  Page 

Img

ผลงานตีพิมพ์ในวารสารวิชาการ

Reference Input Shaping to Reduce the Move Time of a Very Flexible One-Link Manipulator

ผู้แต่ง:ImgDr.Withit Chatlatanagulchai, Associate Professor, Imgธนพล ศรีวงษา, ImgPeter H. Meckl,

วารสาร:

Img
Img

Researcher

ดร. วิทิต ฉัตรรัตนกุลชัย, รองศาสตราจารย์

ที่ทำงาน:ภาควิชาวิศวกรรมเครื่องกล คณะวิศวกรรมศาสตร์ บางเขน

สาขาที่สนใจ:การควบคุมอัตโนมัติ, การสั่นสะเทือนทางกล

Resume